This configuration with KKE TW610 is a Portable Tire Wash configuration. It has a single segment of 4m length which is a suitable distance that can be cover one full rotation of the truck. The water jets from bottom and sides loosen the dirt and wash the tires of the Truck. This Bay is made of Galvanised Steel to ensure the long life.
The system has water collection system to transfer the collected water to a nearby collection tank. On both entry and exit of washing bay, zinc protected Ramps which are fixed in the concrete by Anchor bolts. The structure has a slope of 1:10 ratio. An Entry & Exit ramps are skid proof made with heavy galvanised steel sections.
A steel Collection tank of capacity 1000 Liters / 265 gallons(US), is provided to collect the water from the Tyre Wash Bay. A submersible pump is used to pump the water from this tank to the above ground tank. We have seen our customers washing up to 30 trucks per hour in such Tyre wash configuration. 20kl Tank is preferred for lightweight dirt like coal, etc.
The Settling tank is basically used for collection of water, where slit is removed by Backhoe. The settling tanks have three chambers and the pumps provided in the last chamber of the tank.
|Structure Width||3990 mm|
|Inside Tire Width||900 mm|
|Outside Tire Width||3,000 mm|
|Structure Length||10,000 mm|
|Maximum Axle Load||25,000 kg|
|Voltage||415 VAC / 208 VAC|
|Frequency||50Hz / 60 Hz|
|Generator||Can also run on Backup Generator System|
|Connected Load||17hp /12.7 kW|
|Flow rate||50 mm @ 2 - 3 bar|